Included:
1x XYNERGY below desk power module with 2 power plugs, 1 USB-A and 1 USB-C
Please note that you will need to purchase the 2 metre starter cable in order for this unit to be connected to a wall socket.
Dimensions:
XYNERGY Below Desk Power Module (2 Power, USB A + C)
$169.00 inc. GST
The XYNERGY below desk clip-in tile features 2x GPO, 1x USB Type A and 1x USB Type C. Rated at a whopping 5 Amps this will provide super fast charging for your devices. Clips directly into the under desk cable management tray cut-out, firmly securing it into place and provide plenty of room for storing other cables and accessories. Can be ‘daisy chained’ with the XYNERGY Above Desk Rail to give you a complete power solution. Note: requires the XYNERGY 2m starter lead. Made in Australia with SAA certification (Australian Electrical Safety accreditation)
Description
![XYNERGY Below Desk 2GPO 2USBAC Dimensions]()
Additional information
| Colour | White, Black |
|---|
Frequently Asked Questions
Delivery charges are automatically calculated once you enter your address at checkout.
As a guide here are our delivery charges (applicable to metro areas only, regional rates and delivery to Western Australia will vary depending on location)
- Accessories: $29.70
- Chairs: $55.00
- Standard Sized Desks (up to 1800mm length and 750mm deep): $66.00
- Oversized Desks (up to 1800mm length and 1200mm deep): $99.00
We provide a comprehensive 10 year warranty on all our desks and storage units. 5 year warranty on chairs and accessories.
Yes all our products are commercial quality and either meet or exceed international quality standards (BIFMA)
You will need approximately 30-60 minutes to assemble each desk. We supply all hardware and assembly instructions. Please note that all laminate tabletops are not pre-drilled and you will require a power drill to secure the wood screws. All XOOM tabletops (Straight Edge an Ergo Curve) are pre-drilled without the need for power tools.
Custom orders will vary in price and manufacturing lead times. Please email info@elevateergonomics.com for a quote and more information.
Yes. If you prefer to use your own tabletop then please purchase our standing desk frames
Our laminate tabletops are not pre-drilled and will require power tools for assembly. Our XOOM tabletops are pre-drilled so a screw driver is all that you need for assembly.
Each leg column has it’s own internal motor. This means that all two leg standing desks have two motors. All three leg standing desks have three motors and back to back workstation have four motors.
While both our Jive and Evolution desks have the same functionality and weight capacity, the main difference is the Jive desk has a round style leg column and the Evolution has a rectangular style leg column.
We process all orders within 24 hours of placing your order. Orders are then dispatched the following business day.
